АвтоАвтоматизацияАрхитектураАстрономияАудитБиологияБухгалтерияВоенное делоГенетикаГеографияГеологияГосударствоДомДругоеЖурналистика и СМИИзобретательствоИностранные языкиИнформатикаИскусствоИсторияКомпьютерыКулинарияКультураЛексикологияЛитератураЛогикаМаркетингМатематикаМашиностроениеМедицинаМенеджментМеталлы и СваркаМеханикаМузыкаНаселениеОбразованиеОхрана безопасности жизниОхрана ТрудаПедагогикаПолитикаПравоПриборостроениеПрограммированиеПроизводствоПромышленностьПсихологияРадиоРегилияСвязьСоциологияСпортСтандартизацияСтроительствоТехнологииТорговляТуризмФизикаФизиологияФилософияФинансыХимияХозяйствоЦеннообразованиеЧерчениеЭкологияЭконометрикаЭкономикаЭлектроникаЮриспунденкция

Types of Plastics

Читайте также:
  1. Bioplastic types
  2. Bioplastic types
  3. Bioplastics and biodegradation
  4. British, American and Ukrainian Characters. Overcoming Stereotypes.
  5. Describe the types and organization of distribution channels
  6. Differential diagnosis of the types of muscular hypertonicity
  7. Etiquette and protocol in Tourism. Rules for the Employees in Tourism industry. Tips for travellers.Types of interpersonal contacts in service and tourism enterprises
  8. Text A. Elements of a Building. Types of Foundation.
  9. The total income is the sum of 5 basic types.
  10. TYPES AND FORMS OF BUSINESS ORGANIZATION
  11. Types and Styles of Women's Skirts
  12. Types of buildings

Plastics are non-metallic, synthetic, carbon-based materials. They can be molded, shaped, or extruded into flexible sheets, films, or fibers. Plastics are synthetic polymers. Polymers consist of long-chain molecules made of large numbers of identical small molecules (monomers). The chemical nature of a plastic is defined by the monomer (repeating unit) that makes up the chain of the polymer.

Most plastics are synthesized from organic chemicals or from natural gas or coal. Plastics are lightweight compared to metals and are good electrical insulators. The best insulators now are epoxy resins and teflon.

Plastics can be classified into several broad types.

Thermoplastics soften on heating, and then harden again when cooled. Thermoplastics molecules are also coiled and because of this they are flexible and easily stretched.

Typical example of thermoplastics is polystyrene. Polystyrene resins are characterized by high resistance to chemical and mechanical stresses at low temperatures and by very low absorption of water. These properties make the polystyrenes especially suitable for radio-frequency insulation and for parts used at low temperatures in refrigerators and in airplanes. PET (polythene terephthalate) is a transparent thermoplastic used for soft-drinks bottles. Thermoplastics are also viscoelastic, that is, they flow (creep) under stress. Examples are polythene, polystyrene and PVC.

PVC is a thermoplastic polymer made from vinyl chloride, a colourless solid with outstanding resistance to water, alcohols, and concentrated acids and alkalis. It is obtainable as granules, solutions, lattices, and pastes. When compounded with plasticizers, it yields a flexible material more durable than rubber. It is widely used for cable and wire insulation, in chemical plants, and in the manufacture of protective garments. Blow moulding of unplasticized PVC produces clear, tough bottles, which do not affect the flavour of their contents. PVC is also used for production of tubes or pipes.

Polystyrene is a thermoplastic produced by the polymerization of styrene. The electrical insulating properties of polystyrene are outstandingly good and it is relatively unaffected by water. Typical applications include light fixtures, toys, bottles, lenses, capacitor dielectrics, medical syringes, and light-duty industrial components. Extruded sheets of polystyrene are widely used for packaging, envelope windows, and photographic film. Its resistance to impact can be improved by the addition of rubber modifiers. Polystyrene can be readily foamed; the resulting foamed polystyrene is used extensively for packaging.

Polythene is a plastic made from ethane. It is one of the most widely used important thermoplastic polymers. Polythene is a white waxy solid with very low density, reasonable strength and toughness, but low stiffness. It is easily moulded and has a wide range of uses in containers, packaging, pipes, coatings, and insulation.

Thermosetting plastics (thermosets) do not soften when heated, and with strong heating they decompose. In most thermosets final cross-linking, which fixes the molecules, takes place after the plastic has already been formed.

Thermosetting plastics have a higher density than thermoplastics. They are less flexible, more difficult to stretch, and are less subjected to creep. Examples of thermosetting plastics include epoxy resins, most polyesters, and phenolic polymers such as phenol-formaldehyde resin.

Epoxy resin is a thermoset plastic containing epoxy groups. Epoxy resin hardens when it is mixed with solidifier and plasticizer. Plasticizers make a polymer more flexible.

Epoxy resins have outstanding adhesion, toughness, and resistance to attack from chemicals. They form strong bonds and have excellent electrical insulation properties. Large, complex, void-free castings can be made from them. They are also used as

adhesives, and in composites for boat building and sports equipment.

Elastomers are similar to thermoplastics but have sufficient cross-linking between molecules to prevent stretching and creep.

 

3. Запомните необходимый минимум профессиональной лексики:

oxygen кислород
nitrogen азот
liquid жидкий
pressure давление
resin смола
substitute заменитель
obsolete устаревший
lightness светлота
absorption поглощение
frequency частота
thermosetting термореактивный
acid кислота
alkali щелочь
polystyrene полистирол
adhesive клейкое вещество

Задание II

1. Определите по формальным признакам, какой частью речи являются следующие слова, и переведите их:

Commercial, attractive, appearance, impression, replacement, permanently, absorption, frequency, sufficient, obtainable, protective, outstandingly

2. Определите значение суффиксов и префиксов в следующих словах и переводите их:

Subtype, inorganic, outgrow, unreliable, unavailable, lightness,

solidifier, colourless, insulator, unaffected

Задание III

1. Подберите эквиваленты к глаголам, обозначенным цифрами:

1. achieve a) отливать в форму
2. mold b) улучшать
3. shape c) растягивать
4. extrude d) смягчаться
5. soften e) вспенивать
6. stretch f) разлагаться
7. decompose g) формовать выдавливанием
8. prevent h) придавать форму
9. improve i) достигать
10. foam j) получать, завоевывать

2. Подберите эквиваленты к словосочетаниям, обозначенным цифрами:


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |

Поиск по сайту:



Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав. Студалл.Орг (0.004 сек.)