АвтоАвтоматизацияАрхитектураАстрономияАудитБиологияБухгалтерияВоенное делоГенетикаГеографияГеологияГосударствоДомДругоеЖурналистика и СМИИзобретательствоИностранные языкиИнформатикаИскусствоИсторияКомпьютерыКулинарияКультураЛексикологияЛитератураЛогикаМаркетингМатематикаМашиностроениеМедицинаМенеджментМеталлы и СваркаМеханикаМузыкаНаселениеОбразованиеОхрана безопасности жизниОхрана ТрудаПедагогикаПолитикаПравоПриборостроениеПрограммированиеПроизводствоПромышленностьПсихологияРадиоРегилияСвязьСоциологияСпортСтандартизацияСтроительствоТехнологииТорговляТуризмФизикаФизиологияФилософияФинансыХимияХозяйствоЦеннообразованиеЧерчениеЭкологияЭконометрикаЭкономикаЭлектроникаЮриспунденкция

Question 3. The left describes some types of connections while the right describes some types of cables

Читайте также:
  1. Answer the following questions.
  2. Answer the following questions.
  3. Answer the question: What is the main task of criminal law?
  4. Answer the questions
  5. Answer the questions in the written form.
  6. Answer the questions to check your reading comprehension.
  7. Answer the questions.
  8. Answer these questions.
  9. Answer these questions.
  10. B. Match the questions from part A with the answers (ATTENTION: the answers are given from the point of view of American legislation).
  11. CHAPTER 11. QUESTION TAGS, SHORT QUESTIONS, ECHO-QUESTIONS AND SHORT ANSWERS
  12. CHAPTER 6. ANSWERS TO YES/NO QUESTIONS

The left describes some types of connections while the right describes some types of cables. Drag the items on the left to the proper locations.

Answer:

Explanation:

To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host(PC), Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable

For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host…).

+ We can connect a modem to router auxiliary port using a rollover cable. Recall that the purpose of the router’s auxiliary port is for connecting to a modem and most Cisco routers have a second port on the back called the auxiliary port. We can use this port in case of a far-away router goes down, the administrator can have someone in the area go to the router, plug in a modem and access to the router remotely (if using the console port, we have to go to the site to work with that router).

+ We can connect a PC serial port to a switch/router console port through the RJ-45 to DB-9 or RJ-45 to DB-25 adapter (at the PC end), depending on the computer.


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 |

Поиск по сайту:



Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав. Студалл.Орг (0.002 сек.)