Remote surveillance program

■ 1.1 Functions & Features

■ 1.2 System installation

■ 1.3 How to use

1.1 Functions & Features

Main functions of Remote surveillance program

- Remote status monitoring (Video, Audio, Sensor, Control)

- Group mode support (Simultaneous surveillance of maximum 16 channels)

- Remote control (PTZ, Relay, emergency recording)

- Remote search

- Remote file saving

- Remote setting

- Two-way audio communication

- Recording & searching

- Remote Back-up (Manual, Auto)

1.2 System installation

Execute RSSetup.exe file.

Click “Next” and proceed the next procedure.

- DirectX 9.0 is necessarily required to execute the program, so install it first.

- When the installation is completed, the “Remote Surveillance” icon is displayed on

the Windows background.

The user also can see the “direct access” icon in Start / Program / DVR / NETWORK.

- Execute the icon on the Windows background or Start / Program / DVR / NETWORK

to operate the program.

1.3 How to use

The main screen of the remote surveillance program is composed of several parts as below.

1.3.1. Log-in

The factory default mode ID is “system” and the password is “manager”.

After any user is registered in the program, they can not be used any more.

If the user is registered already, the user can log in with the registered ID

& password.

1.3.2. Registration

When the user clicks the registration button of the main screen, the

registration window will be floated up.

1.3.2.1 Site registration

Click the site icon in the upper-left side of the screen to register a site.

(1) New site registration

Input the site name, IP address, the registered User ID & Password.

Select LAN or ISDN/Modem in the Network part. Then, click the “Site Add”

button to complete the registration.

If the user connects to the DVR without ID & Password, the user can use

Anonymous Connection check box, but the available functions are limited.

(Only live video & audio monitoring are available.)

Port of this screen means TCP/IP Port and it should be same to the DVR setting.

If the number is prohibited, make the Port number available at the firewall or

change the port number of the DVR & RS program setting.

(2) Editing the registered site information

Select the site to edit in the registered site list, and click the “Edit” button after

changing the currently recorded information.

(3) Deleting the registered site

Select the site to delete in the registered site list, and click the “Delete” button.

1.3.2.2 Group registration

Click the Group icon in the upper-left side of the screen to register a group.

Click the “Add Group” button and input a

new group name.

Then click the group name and double click

the site address part to position the selected

camera.

The user can position the cameras without

considering the sequence.

(For example, if the 6th camera of A site is positioned in index no. 1, the 3rd camera of

B site could be positioned in index no. 2.)

The IP addresses of registered sites that the user sets in 2.1

of this manual will be displayed in the “Site Name”.

Select the IP address & camera number and click the “Save

button” to complete the positioning.

The user can not position the same camera twice in a group.

1.3.2.3 User registration

(1) New user registration

Click the “ADD” button after inputting the new user’s registration information.

(2) Editing the user’s information.

Select the user to edit in the registered user list, and click the “Edit” button after

changing the currently recorded information & inputting the password again in “Conf.

Password”.

(3) Deleting the user’s ID

Select the user’ ID to delete in the registered user list, and click the “Delete” button

after inputting the password in “Conf. Password”.

1.3.2.4 System setting

The user can setup the functions with clicking system icon.

(1) Language: The user can choose Language of the program.

(2) Display Mode in one screen

When one channel is to be displayed, the user can choose to display the image

either enlarging image on the whole screen area, or the original size.

(3) With clicking MODEM/ISDN button, Network Setup Wizard of the Window is to be operated to set MODEM. MODEM/ISDN.

(4) Event Pop-up

The user can choose the event type which happens in DVR, when the user want to activate popup in the Client program.

(5) Alarm Sound

The user can choose warning sound for the remote program, when an event happens in DVR.

(6) Recording data path

The user can set a path to save display data for emergency recording.

(7) Back-up path (VDB)

The location where user want to backup by VDB file type.

(8) Back-up path (AVI)

The location where user want to backup by VDB file type.

(9) Back-up log

The location where user want to backup by Backup log

Maximum Backup Speed: to set up bandwidth of the network for backup.

1.3.3. Connection

Both one site connection and group site connection are available.

1.3.3.1 One site connection

Connection is made with clicking of the user want to connect the site

Site status is shown by the color of the icon.

- Yellow: connected

- Red: Event Alarm

- Grey: not connected

The connection can be continued for each site and only the selected site can be monitored.

When the connection is continued, the color is yellow. To see the connected site’s image, click on the list of the site.

With clicking + on the tree, the user can see camera, sensor and relay out status of the each site.

1.3.3.2 Group connection

In group mode, the group names that are registered in “Group

registration” are displayed in the left side, and the camera combination

of the selected group Is displayed in the right side.

Select the group to connect and click the connection button.

1.3.3.3 Disconnection

To disconnect one channel which the user sets in 3.1 of this manual, click

button, and to disconnect all channels, click button.

1.3.4. Real time video surveillance (Live)

When the user connects to the selected site, the real-time video image is displayed with

the related information. (The site & camera name (as set in the DVR) in the upper-left

side, image size in the bottom-left side, “Live” in the upper-right side)

1.3.4.1 Screen division

The user can select the image display mode among the various screen division

modes of 1, 4, 6, 8, 9, 10, 13, 16 divisions.

Select a division mode among the buttons below.

1.3.4.2 Full screen

The whole screen is turned to the image display area. To return to the

pre-screen mode, click the right button of the mouse.

1.3.4.3 Screen rotation

Currently displayed screen division mode is rotated automatically.

1.3.4.4 Snap shot

The user can capture, record & print the currently displayed image by this

button.

1.3.4.5 Next screen

Currently displayed screen division mode is turned to the next screen.

For example, if 1~4 channel are displayed currently, the screen will be

turned to 5~8 channels by this button.

1.3.4.6 Screen location change

The user can exchange screen locations by Drag-Drop the left button of the mouse.

1.3.4.7 Audio playback

To listen to the recorded audio data, click the selected camera button or the

image of the channel that the audio recording is set in the DVR, while the

audio button is selected.

1.3.4.8 Channel Connect

This function is used when the user want to see the live

display or search of the other site. If the right button is

clicked, the below menu is activated.

(1) Live Monitoring: The specified image is displayed with clicking ‘ok’ after

choosing site, camera and live.

(2) Channel Search: Time Window is displayed with choosing the specified site and

camera. Type in date and time to see search window. ‘PLAYBACK’ will be

displayed on the upper right screen.

1.3.4.9 Channel Save

To save specified channel while monitoring, click right area of the screen, and

choose ‘ start saving’ from the menu list to see “LIVE+REC” on the upper right

area. The channel will be saved in the indicated route as in 3.2.4.(6). To search

channels, route search function is needed as in the 1.3.12.

To stop saving, click ‘stop saving’ with clicking on the right button of mouse.

1.3.4.10 Live Panorama

The user can choose ‘start panorama’ of the desired channel with clicking of the

right button of the mouse. To stop this, choose ‘stop panorama’ with clicking of the

right button of the mouse, the image is returned to the general monitoring mode.

1.3.5. Alarm event

When remote notification is setup in the connected site or DVR, Camera disconnection,

Sensor, Motion Detection are displayed real-time.

1.3.6. Remote file saving button

Remote real-time images can be saved in the client’s PC. The data is saved as

designated in 3.2.4(6). Clicking button starts saving the whole screen, and each

channel shows ‘LIVE+REC’. When saving is finished the message is changed to

‘LIVE’.

1.3.7. Remote Pan/Tilt control

Select the screen to control the pan/tilt and operate the

function with the buttons below.

If the pan/tilt function is operated in the DVR, the remote

control does not work.

1.3.8. Remote sensor detection & relay control

The sensor detection & relay status of the selected site is

displayed in real-time.

The user can operate on/off control remotely.

1.3.9. Remote environment setting

The user can operate remote environment setting by using remote setting button. If the user clicks the remote setting button, the “Environment setup” screen of

the selected DVR will be displayed.

(Please refer to the software manual. If the selected DVR is currently being set,

the remote setting does not work.)

1.3.10. Two-way audio communication

If the user clicks the two-way audio button in the sensor window, audio

communication with the selected DVR user will be available.

1.3.11. Remote emergency recording button

The remote emergency record button in the sensor window operates all channel

recording remotely in an emergency. The data is recorded in the currently

displayed DVR.

1.3.12. Recorded data playback

Click the search tap to enter the recorded data playback screen. To return to

the real- time surveillance (live) screen, click any other tap among the three taps

except the search tap.

1.3.12.1 Remote search

Click the selected date, hour & minute after the recorded time is displayed.

Then, click the playback button to search the recorded data.

1.3.12.2 Search Saving

To search saved images by clicking recording

button or by channel search, click route

specifying button to specify route on the

saving search screen. Then choose Directory of

the saved files with clicking route search button on

the folder search screen..

Folder name shows Date and time. With choosing the path, files under the folder are

shown. Click ‘enter’ after choosing the desired file to return to the search screen.

1.3.12.3 Channel Connection

The user can monitor the current screen by channel, search other sites or different

time while searching the whole screen. Please refer the 1.3.4.8

1.3.12.4 Saving Search Screen

There are two ways to save current search screen; Saving by Channel with clicking

the right button of the mouse and emergency recording button. ‘Playback + REC’ is

displayed on the channel images recorded on the upper right.

1.3.12.5 Browse saved image panorama

To see the panorama images, click the right button of the mouse and choose

‘panorama starting’. To stop this, choose ‘stop panorama’ from the right button of the

mouse.

Поиск по сайту: