Question 10
Refer to the exhibit. Given the output shown from this Cisco Catalyst 2950, what is the most likely reason that interface FastEthernet 0/10 is not the root port for VLAN 2?
Switch# show spanning-tree interface fastethernet0/10
A. This switch has more than one interface connected to the root network segment in VLAN 2. B. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree. C. This switch interface has a higher path cost to the root bridge than another in the topology. D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.
Answer: C
CCNA STP 2
Question 1
Three switches are connected to one another via trunk ports. Assuming the default switch configuration, which switch is elected as the root bridge for the spanning-tree instance of VLAN 1?
A. the switch with the highest MAC address B. the switch with the lowest MAC address C. the switch with the highest IP address D. the switch with the lowest IP address
Answer: B 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | Поиск по сайту:
|