Using the network in the exhibit, what would be the default gateway address for host A in the 192.133.219.0 network?

192.133.219.1*
192.133.219.0
192.135.250.1
192.31.7.1

26
Which technology provides a solution to IPv4 address depletion by allowing multiple devices to share one public IP address?

NAT*
DHCP
SMB
HTTP
ARP
DNS

27
A technician uses the ping 127.0.0.1 command. What is the technician testing?

the TCP/IP stack on a network host*
connectivity between two adjacent Cisco devices
connectivity between two PCs on the same network
physical connectivity of a particular PC and the network
connectivity between a PC and the default gateway

28
What is the purpose of ICMP messages?

to ensure the delivery of an IP packet
to inform routers about network topology changes
to provide feedback of IP packet transmissions*
to monitor the process of a domain name to IP address resolution

29
Which basic process is used to select the best path for forwarding data?

encapsulation
addressing
routing*
switching

30
Which wireless security procedure should be used to hide the WLAN ID from wireless clients?

Configure WEP only on the access point.
Configure MAC address filtering on the access point.
Decrease the antenna spectrum on each wireless client.
Install WAP on the wireless clients.
Disable the broadcast of the SSID on the access point.*

31
What statement describes the function of the Address Resolution Protocol?

ARP is used to discover the MAC address of any host on the local network.*
ARP is used to discover the IP address of any host on the local network.
ARP is used to discover the IP address of any host on a different network.
ARP is used to discover the MAC address of any host on a different network.

32
A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used?

dial-up
cell modem
satellite
DSL*
cable modem

33
What is an advantage of using IPv6?

higher bandwidth
more addresses for networks and hosts*
more frequencies
faster connectivity

34
Which device should be used for enabling a host to communicate with another host on a different network?

router*
hub
switch
host

35
What is the purpose of the routing process?

to encapsulate data that is used to communicate across a network
to select the paths that are used to direct traffic to destination networks*
to convert a URL name into an IP address
to provide secure Internet file transfer
to forward traffic on the basis of MAC addresses

36
Which type of connector does a network interface card use?

DIN
RJ-11
RJ-45*
PS-2

37
Why would a network administrator use the tracert utility?

to display the IP address, default gateway, and DNS server address for a PC
to check information about a DNS name in the DNS server
to determine the active TCP connections on a PC
to identify where a packet was lost or delayed on a network*

38
How does a networked server manage requests from multiple clients for different services?

The server uses IP addresses to identify different services.
Each request is tracked through the physical address of the client.
The server sends all requests through a default gateway.
Each request is assigned source and destination port numbers.*

39
Which protocol translates a website name such as www.cisco.com into a network address?

FTP
DHCP
HTTP
DNS*

Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address?

It is the IP address of the Router1 interface that connects the PC1 LAN to Router1.*
It is the IP address of Switch1 that connects PC1 to other devices on the same LAN.
It is the IP address of the Router1 interface that connects the company to the Internet.
It is the IP address of the ISP network device located in the cloud.

CCNA 1 v5.0 R&S ITN Final Exam Answers 2014

Поиск по сайту: