How does a networked server manage requests from multiple clients for different services:Each request is assigned source and destination port numbers

How does adding an Ethernet line card affect the form factor of a switch:by expanding the port density

How does the network layer use the MTU value: The MTU is passed to the network layer by the data link layer

How is the magnetic field cancellation effect enhanced in UTP cables:by increasing and varying the number of twists in each wire pair

How many bits are in an IPv4 address:32

How many host addresses are available on the 192.168.10.128/26 network: 62

How many usable host addresses are there in the subnet 192.168.1.32/27:30
How many host addresses are available on the network 172.16.128.0 with a subnet mask of 255.255.252.0:1022
A network administrator is variably subnetting a network. The smallest subnet has a mask of 255.255.255.248. How many host addresses will this subnet provide?:6
Refer to the exhibit.A company uses the address block of 128.107.0.0/16 for its network. What subnet mask would provide the maximum number of equal size subnets while providing enough host addresses for each subnet in the exhibit:255.255.255.128
Refer to the exhibit.The network administrator has assigned the LAN of LBMISS an address range of 192.168.10.0. This address range has been subnetted using a /29 prefix. In order to accommodate a new building, the technician has decided to use the fifth subnet for configuring the new network (subnet zero is the first subnet). By company policies, the router interface is always assigned the first usable host address and the workgroup server is given the last usable host address. Which configuration should be entered into the properties of the workgroup server to allow connectivity to the Internet:IP address: 192.168.10.38 subnet mask: 255.255.255.248, default gateway: 192.168.10.33
How many bits must be borrowed from the host portion of an address to accommodate a router with five connected networks:three
A company has a network address of 192.168.1.64 with a subnet mask of 255.255.255.192. The company wants to create two subnetworks that would contain 10 hosts and 18 hosts respectively. Which two networks would achieve that:192.168.1.64/27*192.168.1.96/28
In a network that uses IPv4, what prefix would best fit a subnet containing 100 hosts:/25
Refer to the exhibit.Given the network address of 192.168.5.0 and a subnet mask of 255.255.255.224, how many addresses are wasted in total by subnetting each network with a subnet mask of 255.255.255.224:72

How should traffic flow be captured in order to best understand traffic patterns in a network:during peak utilization times

If a configuration file is saved to a USB flash drive attached to a router, what must be done by the network administrator before the file can be used on the router:Edit the configuration file with a text editor.

In which default order will a router search for startup configuration information: NVRAM, TFTP, setup mode

Launch PT Hide and Save PT.Open the PT Activity. Perform the tasks in the activity instruction and then answer the question.What destination address will PC1 include in the destination address field of the Ethernet frame that it sends to PC2:0030.a3e5.0401

Match each type of frame field to its function. (Not all options are used.): addressing(This field helps to direct the frame toward its destination.); error detection(This field checks if the frame has been damaged during the transfer.); type(This field is used by the LLC to identify the Layer 3 protocol.); frame start(This field identifies the beginning of a frame)

Match the commands to the correct actions. (Not all options are used.): provides security on the console(Router(config-line)# password class); Router(config-line)# password class(Router(config)# banner motd); configures a name on the router(Router(config)# hostname CL1)

Match the description to the IPv6 addressing component. (Not all options are used.): This part of the address is used by an organization to identify subnets.(subnet ID); This network portion of the address is assigned by the provider.(global routing prefix); This part of the address is the equivalent to the host portion of an IPv4 address.(interface ID)

Match the function to the appropriate OSI layer. (Not all options are used.): application layer(providing an interface with the network); presentation layer(data compression); session layer(resuming an interrupted dialog)

Match the legacy IP address class with the answer that represents the entire private address range reserved within that class. (Not all options are used.): A 10.0.0.0 - 10.255.255.255;B 172.16.0.0 - 172.31.255.255;C 192.168.0.0 - 192.168.255.255

Match the network trend to the corresponding description.(Not all options are used): BYOD(allows the end user to use personal tools to communicate); online collaboration (provides the end users with tools to work); cloud computing(allows the use of applications through a)

Match the steps to the physical layer operations that occur when data is sent from one node and received at another node.

Match the TCP flag to the correct step in the session establishment sequence. (Not all options are used.): 1 SYN;2 SYN + ACK;3 ACK

Match the TCP/IP layer to the protocol, service, or application that works within that layer. (Not all options are used.): applicationlayer(DNS),transportlayer(UDP), internetlayer(ICMP), networkaccesslayer(WLAN), OtherIncorrectMatchOptions(POST)

Match the type of threat with the cause. (Not all options are used.): hardware threats(physical damage to servers, routers, switches, cabling plant, and workstations); environmental threats(temperature extremes (too hot or too cold) or humidity extremes (too wet or too dry); electrical threats(voltage spikes, insufficient supply voltage (brownouts), unconditioned power (noise), and total power loss); maintenance threats(poor handling of key electrical components (electrostatic discharge), lack of critical spare parts, poor cabling, and poor labeling)

On which switch interface would an administrator configure an IP address so that the switch can be managed remotely: VLAN 1