AC Motors

Two basic types of motors are designed to operate on polyphase alternating current, synchronous motors and induction motors. The synchronous motor is essentially a three-phase alternator operated in reverse. The field magnets are mounted on the rotor and are excited by direct current, and the armature winding is divided into three parts and fed with three-phase alternating current. The variation of the three waves of current in the armature causes a varying magnetic reaction with the poles of the field magnets, and makes the field rotate at a constant speed that is determined by the frequency of the current in the AC power line. The constant speed of a synchronous motor is advantageous in certain devices; however, in applications where the mechanical load on the motor becomes very great, synchronous motors cannot be used, because if the motor slows down under load it will “fall out of step” with the frequency of the current and come to a stop. Synchronous motors can be made to operate from a single-phase power source by the inclusion of suitable circuit elements that cause a rotating magnetic field.

The simplest of all electric motors is the squirrel-cage type of induction motor used with a three-phase supply. The armature of the squirrel-cage motor consists of three fixed coils similar to the armature of the synchronous motor. The rotating member consists of a core in which are imbedded a series of heavy conductors arranged in a circle around the shaft and parallel to it. With the core removed, the rotor conductors resemble in form the cylindrical cages once used to exercise pet squirrels. The three-phase current flowing in the stationary armature windings generates a rotating magnetic field, and this field induces a current in the conductors of the cage. The magnetic reaction between the rotating field and the current-carrying conductors of the rotor makes the rotor turn. If the rotor is revolving at exactly the same speed as the magnetic field, no currents will be induced in it, and hence the rotor should not turn at a synchronous speed. In operation the speeds of rotation of the rotor and the field differ by about 2 to 5 percent. This speed difference is known as slip. Motors with squirrel-cage rotors can be used on single-phase alternating current by means of various arrangements of inductance and capacitance that alter the characteristics of the single-phase voltage and make it resemble a two-phase voltage. Such motors are called split-phase motors or condenser motors (or capacitor motors), depending on the arrangement used. Single-phase squirrel-cage motors do not have a large starting torque, and for applications where such torque is required, repulsion-induction motors are used.

Miscellaneous Machines

For special applications several combined types of dynamoelectric machines are employed. It is frequently desirable to change from direct to alternating current or vice versa, or to change the voltage of a DC supply, or the frequency or phase of an AC supply. One means of accomplishing such changes is to use a motor operating from the available type of electric supply to drive a generator delivering the current and voltage wanted. Motor generators, consisting of an appropriate motor mechanically coupled to an appropriate generator, can accomplish most of the indicated conversions. A rotary converter is a machine for converting alternating to direct current, using separate windings on a common rotating armature. The AC supply voltage is applied to the armature through slip rings, and the DC voltage is led out of the machine through a separate commutator. A dynamotor, which is usually used to convert low-voltage direct current to high-voltage direct current, is a similar machine that has separate armature windings.

Pairs of machines known as synchros, selsyns, or autosyns are used to transmit torque or mechanical movement from one place to another by electrical means. They consist of pairs of motors with stationary fields and armatures wound with three sets of coils similar to those of a three-phase alternator. In use, the armatures of selsyns are connected electrically in parallel to each other but not to any external source. The field coils are connected in parallel to an external AC source. When the armatures of both selsyns are in the same position relative to the magnetic fields of their respective machines, the currents induced in the armature coils will be equal and will cancel each other out. When one of the armatures is moved, however, an imbalance is created that will cause a current to be induced in the other armature. The magnetic reaction to this current will move the second armature until it is in the same relative position as the first. Selsyns are widely used for remote-control and remote-indicating instruments where it is inconvenient or impossible to make a mechanical connection. DC machines known as amplidynes or rotortrols, which have several field windings, may be used as power amplifiers. A small change in the power supplied to one field winding produces a much larger corresponding change in the power output of the machine. These electrodynamic amplifiers are frequently employed in servomechanism and other control systems.

Unit 5

Text B

Поиск по сайту: